List Of Commands; Table 18: Cli Commands To Configure Filter Policies Parameters - Alcatel-Lucent 7750 SR OS Configuration Manual

List of Commands

List of Commands
Table 18
each command is implemented with a short command description. The filter policy command list
is organized in the following task-oriented manner:
•
•
•
•

Table 18: CLI Commands to Configure Filter Policies Parameters

Command
Configure an IP filter policy
config>filter
ip-filter
default-action
description
renum
scope
Configure an IP filter policy entry
config>filter>ip-filter
entry
action
description
Page 302
lists all the filter configuration commands indicating the configuration level at which
Configure an IP filter policy
→
Configure an IP filter policy entry
→
Configure IP filter entry matching criteria
Configure an IPv6 filter policy
→
Configure an IPv6 filter policy entry
→
Configure an IPv6 filter entry matching criteria
Configure a MAC filter policy entry
→
Configure MAC filter entry matching criteria
Configure a redirect policy
Creates an IP filter policy.
The default action specifies the action to be applied to packets when the
packets do not match the specified criteria in any of the IP filter entries of
the filter.
A text string describing the filter policy.
Renumbers existing filter entries to properly sequence filter entries.
Configures the filter policy scope as exclusive or template. An exclusive
policy can only be applied to a single entity (SAP or network port). A
template policy can be applied to multiple SAPs or network ports.
Creates a filter entry and identifies a group of match criteria and the
corresponding action.
Creates the drop or forward action associated with the match criteria. If
not specified, the filter policy entry is not taken into account.
A text string describing the entry.
Description
7750 SR OS Router Configuration Guide
Page
358
363
357
388
363
364
366
357