Alcatel-Lucent 7750 SR OS Configuration Manual page 127

net25_1_2
net2_1_2
net3_1_2
net4_1_2
net5_1_2
net6_1_2
net7_1_2
net8_1_2
net9_1_2
-------------------------------------------------------------------------------
No. of BFD Interfaces: 26
===============================================================================
session
Syntax session [src ip-address [dst ip-address] | detail]
Context show>router>bfd
Description
This command displays session information.
Parameters
ip-address — Only displays the interface information associated with the specified IP address.
Output BFD Session Output — The following table describes the show BFD session output fields:
State
Protocol
Tx Intvl
Tx Pkts
Rx Intvl
Rx Pkts
Mult
Sample Output
B:CORE2# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface
7750 SR OS Router Configuration Guide
Values
ipv4-address
Label
Displays the administrative state for this BFD session.
Displays the active protocol.
Displays the interval, in milliseconds, between the transmitted BFD mes-
sages to maintain the session
Displays the number of transmitted BFD packets.
Displays the expected interval, in milliseconds, between the received BFD
messages to maintain the session
Displays the number of received packets.
Displays the integer used by BFD to declare when the neighbor is down.
100 100
100 100
100 100
100 100
100 100
100 100
100 100
100 100
100 100
a.b.c.d (host bits must be 0)
Description
State
IP Router Configuration
3
3
3
3
3
3
3
3
3
Tx Intvl Rx Intvl Mult
Page 127