Apply Filter Policies To Network Port; Apply An Ip Interface - Alcatel-Lucent 7750 SR OS Configuration Manual

Apply Filter Policies to Network Port

IP filter policies can be applied to network IP interfaces. MAC filters cannot be applied to network
IP interfaces or to routable IES services. IPv6 filter policies can be applied to network IP interfaces
in the IPv6 context within the interface configuration.
Filter policies must be created prior to the service creation.

Apply an IP Interface

CLI Syntax: config>router# interface ip-int-name
Example
A:ALA-48>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
...
...
#------------------------------------------
A:ALA-48>config>router#
7750 SR OS Router Configuration Guide
ingress
filter
ip-filter-id
:
config>router# interface to-104
config>router>if# ingress
config>router>if>ingress# filter ip 10
config>router>if# exit
config>router>if# egress
config>router>if>egress# filter ip 10
config>router>if# exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
ingress
filter ip 10
exit
egress
filter ip 10
exit
exit
Filter Policies
Page 327