Alcatel-Lucent 7750 SR OS Configuration Manual page 400

Show Commands
Page 400
Label
Def. Action
Filter Match
Criteria
Entry
Log Id
Src. IP
Dest. IP
Next-header
ICMP Type
Fragment
Sampling
IP-Option
TCP-syn
Match action
Description (Continued)
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
Indicates the filter is an IP filter policy.
IP —
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The filter log ID.
The source IPv6 address and prefix length match criterion.
The destination IPv6 address and prefix length match criterion
The next header ID for the match criteria.
next-header specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
Off —
Configures a match on all fragmented IP packets.
On —
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
Specifies that the SYN bit is disabled.
Off —
Specifies that the SYN bit is set.
On —
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is (Inac-
tive), then the filter entry is incomplete as no action has been specified.
Drop packets matching the filter entry.
Drop —
The explicit action to perform is forwarding of the
Forward —
packet.
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
7750 SR OS Router Configuration Guide
indicates no
Undefined
indicates no ICMP type
Undefined