Alcatel-Lucent 7750 SR OS Configuration Manual page 158

Show Commands
tunnel-table
Syntax tunnel-table [ip-address[/mask]] [protocol protocol | sdp sdp-id] [summary]
Context show>router
Description This command displays tunnel table information.
Note that auto-bind GRE tunnels are not displayed in show command output. GRE tunnels are not the
same as SDP tunnels that use the GRE encapsulation type. When the auto-bind command is used when
configuring a VPRN service, it means the MP-BGP NH resolution is refering to the core routing
instance for IP reachability. For a VPRN service this object specifies the lookup to be used by the
routing instance if no SDP to the destination exists.
Parameters
[ip-address[/mask]] — Displays the specified tunnel table's destination IP address and mask.
protocol protocol — Dislays LDP protocol information.
sdp sdp-id — Displays information pertaining to the specified SDP.
summary — Displays summary tunnel table information.
Output Tunnel Table Output — The following table describes tunnel table output fields.
Destination
Owner
Encap
Tunnel ID
Pref
Nexthop
Metric
Sample Output
A:ALA-A>config>service# show router tunnel-table
===============================================================================
Tunnel Table
===============================================================================
DestinationOwner
-------------------------------------------------------------------------------
10.0.0.1/32 sdp
10.0.0.1/32 sdp
10.0.0.1/32 sdp
10.0.0.1/32 sdp
===============================================================================
A:ALA-A>config>service#
Page 158
Label
The route's destination address and mask.
Specifies the tunnel owner.
Specifies the tunnel's encapsulation type.
Specifies the tunnel (SDP) identifier.
Specifies the route preference for routes learned from the configured
peer(s).
The next hop for the route's destination.
The route metric value for the route.
Encap Tunnel Id
GRE
GRE
GRE
GRE
7750 SR OS Router Configuration Guide
Description
Pref Nexthop Metric
1
10 5 0.0.0.1
21 5 10.0.0.1
31 5 10.0.0.1
41 5 10.0.0.1
0
0
0
0