Common Configuration Tasks
Applying Filter Policies
Filter policies can be associated with the following entities:
Table 19: Applying Filter Policies
Epipe SAP, spoke SDP
Fpipe SAP, spoke SDP
IES interface SAP
Ipipe SAP, spoke SDP
VPLS mesh SDP, spoke SDP,
SAP
VPRN interface SAP, spoke
SDP
Apply IP and MAC Filter Policies
The following example shows an example of applying an IP and a MAC filter policy to an Epipe
service:
CLI Syntax: config>service# epipe service-id
The following displays the command usage to assign IP filters to a service SAP and spoke SDP:
Example
Page 324
IP Filter
sap
sap-id
egress
filter {ip
ingress
filter {ip
spoke-sdp sdp-id:vc-id [vc-type {ether|vlan}]
egress
filter {ip
ingress
filter {ip
:
config# service epipe 103
config>service>epipe# sap 1/1/1.1.1
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress# filter ip 10
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# filter mac 92
config>service>epipe>sap>egress# exit
config>service>epipe>sap# exit
MAC Filter
Epipe SAP, spoke SDP
N/A
N/A
N/A
VPLS mesh SDP, spoke SDP,
SAP
N/A
| mac-filter-id}
ip-filter-id
| mac-filter-id}
ip-filter-id
| mac-filter-id}
ip-filter-id
| mac-filter-id}
ip-filter-id
7750 SR OS Router Configuration Guide
IPv6 Filter
N/A
N/A
IES interface SAP
N/A
N/A
N/A