Apply An Ipv6 Interface - Alcatel-Lucent 7750 SR OS Configuration Manual

Common Configuration Tasks

Apply an IPv6 Interface

Use the following CLI syntax to apply an IPv6 filter policy to a network IP interface:
CLI Syntax: config>router# interface ip-int-name
Example
A:config>router>if# info
----------------------------------------------
----------------------------------------------
A:config>router>if#
Page 328
egress
filter ipv6 ipv6-filter-id
ingress
filter ipv6 ipv6-filter-id
:
config>router# interface ipv6-test
config>router>if# ingress filter ipv6 1
config>router>if# egress filter ipv6 1
config>router>if# ingress filter ip 2
config>router>if# egress filter ip 2
port 1/1/1
ipv6
address 3FFE::101:101/120
exit
ingress
filter ip 2
filter ipv6 1
exit
egress
filter ip 2
filter ipv6 1
exit
7750 SR OS Router Configuration Guide