Network Ingress Ipv6 Match Criteria - Alcatel-Lucent 7950 Quality Of Service Manual

Applying Network Queue Policies

Network Ingress IPv6 Match Criteria

IPv6 match criteria classification is supported in the ingress section of a network QoS policy.
The classification only applies to the outer IPv6 header of non-tunneled traffic, consequently the
use of an ipv6-criteria statement in a network QoS policy is ignored for received traffic when the
network QoS policy is applied on the ingress network IP interface in the following cases:
•
•
•
•
•
•
•
Attempting to apply a network QoS policy containing an ipv6-criteria statement to any object
except a network IP interface will result in an error.
An example configuration is shown below:
Page 92
Mesh SDPs in VPLS services
Spoke SDPs in VPLS and Xpipe services
Spoke SDP under an IP interface in an IES or VPRN service
Spoke SDPs in a VPRN service
Automatically created bindings using the auto-bind-tunnel command in a VPRN service
IPv6 over IPv4 tunnels
VXLAN bindings (egress VTEP, VNI)
network 10 create
ingress
ipv6-criteria
entry 10 create
match
dst-ip 2001:db8:1000::1/128
exit
action fc "ef" profile in
exit
exit
exit
7950 XRS Quality of Service Guide