Apply Filter Policies To An Ies Interface - Alcatel-Lucent 7210 SAS E OS Configuration Manual

Apply Filter Policies to an IES Interface

IP filter policies can be applied to an IP interface created in an IES service. These filter policies
apply to the routed management traffic.
CLI Syntax: config>service>ies# interface ip-int-name
The following displays an IP filter applied to an IES sap at ingress.
A:ALA-48>config>service>ies# info
----------------------------------------------
...
----------------------------------------------
A:ALA-48>config>service>ies#
7210 SAS E Router Configuration Guide
address ip-address
sap sap-id
ingress
filter ip ip-filter-id
interface "to-104" create
address 10.1.2.1/24
sap lag-2:0.* create
ingress
filter ip 10
exit
exit
Filter Policies
Page 87