Apply Filter Policies To A Network Port - Alcatel-Lucent 7450 ESS Series Configuration Manual

Apply (IPv4) Filter Policies to a Network Port
IP filter policies can be applied to network IP (v4)interfaces. MAC filters cannot be applied to
network IP interfaces or to routable IES services.Similarly to applying filter policies to service, IP
(v4) filter policies are applied to network interfaces by associating a policy with ingress and/or
egress direction as desired. Filter ID is used to associate an existing filter policy, or if defined, a
Filter Name for that Filter ID policy can be used in the CLI.
The following displays an IP filter applied to an interface at ingress.
A:ALA-48>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
...
...
#------------------------------------------
A:ALA-48>config>router#
7450 ESS OS Router Configuration Guide
interface "to-104"
address 10.0.0.103/24
port 1/1/1
ingress
filter ip 10
exit
egress
filter ip "default network egress policy"
exit
exit
Filter Policies
Page 387