Prtdiag Command - Fujitsu SPARC Enterprise M8000 Service Manual

2.9.2

prtdiag Command

The prtdiag command displays configuration and diagnostic information.
The prtdiag command is located in the
/usr/platform/platform-name/sbin/ directory.
Note – The prtdiag command might indicate a slot number different than that identified
elsewhere in this document. This is normal.
2.9.2.1 Options
TABLE 2-14
troubleshooting.
Options for prtdiag
TABLE 2-14
Option Description
No option Lists components.
Verbose mode.
-v
describes options for the prtdiag command and how those options can help
How It Can Help
Identifies CPU information, memory configuration, mounted PCI
cards, OBP version number, mode switch status, and CPU
operational mode.
Provides the same information as "no option." Additionally, lists
the detail information of PCI cards.
Chapter 2 System Overview and Troubleshooting 2-39