Cold Replacement - Fujitsu SPARC Enterprise M8000 Service Manual

FIGURE 10-3
OPNL
Base cabinet
TABLE 10-1
TABLE 10-1
Model Name
M8000/M9000 Operator Panel
10.2

Cold Replacement

In cold replacement, none of the replacement work is performed with the maintenance menu
from a terminal connected to XSCF.
The procedure is as follows.
1. Unlock and open a door of the server. (See
Caution – Before touching a FRU or dummy (filler) unit, see
Precautions" on page 1-9
result in serious damage to operating domains.
10-4 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
OPNL Mounting Location (Front of M9000 with the Expansion Cabinet)
lists the abbreviated name of the OPNL of the high-end servers.
Abbreviated Name of the Operator Panel
and be sure to wear the antistatic wrist strap. Failure to do so might
Expansion cabinet
Abbreviated Name
OPNL
Chapter 5)
Section 1.4, "Antistatic