B.3 Memory - Fujitsu SPARC Enterprise M8000 Service Manual

B.3 Memory
The type of memory used is DIMM.
FIGURE B-3
FIGURE B-3
The memory has the following characteristics.
Active maintenance of memory is possible using the DR function.
■
Maintenance or installation of a DIMM module involves removing or installing a CMU.
■
The category of the DIMM as specified by capacity and type is as follows:
■
■
■
■
■
Depending on the DIMMs used, the label format of component numbers and serial
■
numbers differs.
B-8 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
shows the memory.
Memory
DIMM-1GB
DIMM-2GB
DIMM-4GB
DIMM-8GB