Fujitsu SPARC Enterprise M8000 Service Manual page 388

b. Remove two clock control units (CLKUs).
c. Remove two XSCF units.
d. Loosen the four screws securing the XBU shelf. While grasping the handle,
e. Remove all mounted I/O units (IOUs) including filler panels. (See
f. Loosen the four screws securing the IOU shelf. While grasping the handle, pull
20-8 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
For a model with the expansion cabinet, disconnect the cables as well. Disconnect the
cables completely from both cabinets. (See
For a model with the expansion cabinet, disconnect the cables as well. Disconnect the
cables completely from both cabinets. (See
remove the shelf from the cabinet.
the shelf out partially. Then, move your hands to the top frame of the IOU shelf,
and remove the shelf from the cabinet.
Chapter 11)
Chapter 17)
Chapter 7)