Predictive Self-Healing Tools - Fujitsu SPARC Enterprise M8000 Service Manual

Predictive self-healing is an architecture and methodology for automatically diagnosing,
reporting, and handling software and hardware fault conditions. This new technology lessens
the time required to debug a hardware or software problem and provides the administrator
and technical support with detailed data about each fault.
2.6.1

Predictive Self-Healing Tools

In Oracle Solaris OS, the fault manager runs in the background. If a failure occurs, the
system software recognizes the error and attempts to determine what hardware is faulty. The
software also takes steps to prevent that component from being used until it has been
replaced. Some of the specific activities the software takes include:
Receives telemetry information about problems detected by the system software
■
Diagnoses the problems
■
Initiates pro-active self-healing activities. For example, the fault manager can disable
■
faulty components.
The state of a FRU, group of FRUs, or part of a FRU, that has been isolated because a
fault was detected. The isolation is usually done to prevent possibly faulty components
from affecting other system components. The part that is isolated is not always the faulty
part alone; a normal part may be degraded to isolate the faulty part. If a function required
for the operation of the system is degraded, a system failure may result.
When possible, causes the faulty FRU to provide an LED indication of a fault in addition
■
to populating the system console messages with more details
TABLE 2-8
your console and is recorded in the /var/adm/messages file.
Note – The message in
corrective action that the system can perform has already taken place. If your server is still
running, it continues to run.
shows a typical message generated when a fault occurs. The message appears on
TABLE 2-8
indicates that the fault has already been diagnosed. Any
Chapter 2 System Overview and Troubleshooting 2-27