Fujitsu SPARC Enterprise M8000 Service Manual page 107

Oracle
Hide thumbs Also See for SPARC Enterprise M8000:
Table of Contents

Advertisement

Output for the showhardconf command (Continued)
CLKU_B#0 Status:Normal; Ver:0201h; Serial:PP0542M679
+ FRU-Part-Number:CA06620-D322 C1
:
OPNL#0 Status:Normal; Ver:0101h; Serial:PP06058246
+ FRU-Part-Number:CA06620-D382 A2
PSU#0 Status:Normal; Serial:FA11155187;
+ FRU-Part-Number:CA01022-0690 20H
+ Power_Status:On;
:
FANBP_A#0 Status:Normal; Ver:0101h; Serial:PP0607D266
+ FRU-Part-Number:CA21128-B71X 011AE/371-2222-05
FAN_A#0 Status:Normal; Serial:PA0605B287;
+ FRU-Part-Number:CA06622-D012 A5
:
FAN_A#15 Status:Normal; Serial:PA0605B303;
+ FRU-Part-Number:CA06622-D012 A5
:
FANBP_B#0 Status:Normal; Ver:0201h; Serial:PP0607D270
+ FRU-Part-Number:CA21128-B72X 011AE/371-2223-05
FAN_A#4 Status:Normal; Serial:PA0605B297;
+ FRU-Part-Number:CA06622-D012 A5
:
FAN_A#9 Status:Normal; Serial:PA0605B300;
+ FRU-Part-Number:CA06622-D012 A5
:
SWBP#0 Status:Normal; Ver:0101h; Serial:PP0607E759
+ FRU-Part-Number:CA20397-B57X 022AG/371-2243-01
MEDBP#0 Status:Normal; Ver:0101h; Serial:PP06058497
+ FRU-Part-Number:CA20397-B56X 005AA/371-2244-01
2. Verify the status LEDs on the PCI cassette.
The POWER LED should be lit and the CHECK LED should be off.
Note – If an XSCF failover occurs while executing the addfru, deletefru or
replacefru command, the addition, removal or replacement of FRUs may not have been
completed successfully. In such case, log in again to the active XSCF to confirm that the
addition, removal or replacement of FRUs was successfully completed. If the addition,
removal or replacement of the FRUs was not completed successfully, re-execute the
following commands in the manner described:
- For addfru command execution, execute the deletefru command for the relevant
FRU, and then re-execute the addfru command.
- For deletefru command execution, re-execute the deletefru command for the
relevant FRU.
- For replacefru command execution, re-execute the replacefru command for the
relevant FRU.
;
/371-2230-03
;
/371-2239-01
/371-2219-08
;
;
/371-2237-01
/371-2237-01
;
/371-2237-01
/371-2237-01
;
;
Chapter 4
FRU Replacement Preparation
;
;
;
;
;
;
;
;
;
;
4-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise m9000

Table of Contents