5. Keep the door in a safe place.
To reinstall the door, reverse the above steps for removing it.
FIGURE 5-2
Cable holder
5.4
How to Remove a Side Panel
To install an optional power supply cabinet or to connect an expansion cabinet to the M9000
base cabinet, the side panel of the cabinet must be removed.
The side panel hangs from a bracket on the top of the cabinet, and the lower part of the side
panel is secured with a screw or screws.
The structures of side panels are the same even for side panels of different sizes. A large side
panel is secured with two screws, and a small one is secured with one screw.
5-4
SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
How to Remove a Door (Front Door)
Operator panel
Sensor unit