Cleaning An Air Filter (I/O Unit) - Fujitsu SPARC Enterprise M8000 Service Manual

Cleaning an Air Filter (M9000 Server)
This filter cleaning procedure applies to both high-end servers.
Removing of Air Filters (Example Using the M9000 Base Cabinet)
FIGURE 3-2
Fixing bracket (x3)
3.3

Cleaning an Air Filter (I/O Unit)

If your I/O unit has the air filters, do the cleaning. Clean the air filters at the same time that
the air filters of the server are cleaned.
Caution – If you must use a vacuum cleaner for this work, use it outside the computer
room. Do not use it inside the computer room. Using a vacuum cleaner inside the computer
room may result in a server failure.
Chapter 3 Periodic Maintenance 3-5