Fujitsu SPARC Enterprise M8000 Service Manual page 201

3. Prepare the IOU that is to be replaced.
Active replacement:
From the terminal connected to the XSCF, execute the deleteboard command to
dynamically disconnect the target CMU from all the domains that have been recognized in
Step 2 as including the target CMU. (The IOU status can be checked by executing the
showboards command.)
To execute this command, you need the privilege of platform administrator (platadm) or
domain administrator (domainadm). For details, see
FRU from a Domain" on page
M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration (DR) User's Guide. For
details on how to log in to XSCF, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
Hot replacement:
From the terminal connected to the XSCF, select all the domains that have been
recognized in Step 2
-d command to shut down the domains. (The IOU status can be checked by executing
the showboards command.)
Domain administrator authority is required for executing this command. For details on
how to log in to XSCF, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000
Servers XSCF User's Guide.
4. Use the maintenance menu to select the replacement target IOU. (The maintenance
menu is used up to
The fieldeng permission is required for executing this command.
4-4, and the SPARC Enterprise
as including the CMU to be replaced, and execute the poweroff
Step 14.)
Section 4.2.1, "Disconnecting a
Chapter 7 I/O Unit (IOU) Replacement 7-9