Fujitsu SPARC Enterprise M8000 Service Manual page 265

Removing the XSCFU (Front of the M9000 Base Cabinet)
FIGURE 11-6
8. Place the removed XSCFU on an antistatic mat.
9. Mount the replacement XSCFU by following the removal instructions in
Step 7 in reverse order. Align the XSCFU with the slot guides, insert it carefully, and
secure it firmly.
Push the levers as far as they will go, and then push the knob screws on the eject/lock
levers to lock them in position. When the knob screws remain in position, the XSCF unit
is securely mounted.
2
Chapter 11 XSCF Unit Replacement
1
1
Step 6 and
11-9