Fujitsu SPARC Enterprise M8000 Service Manual page 181

2. Tilt the CPU Module insertion/extraction tool to the DIMM side, and pull up the
CPU Module to disengage the CMU connector.
Lever Up the CPU Module
FIGURE 6-17
Caution – When tilting the CPU Module insertion/extraction tool toward the DIMM, do
not tilt it to such an extent that the CPU Module is raised beyond its limit height.
Caution – Be sure not to remove the tool before removing the CPU Module. Otherwise, the
CMU may be damaged.
Chapter 6 Replacement of CPU/Memory Board Unit (CMU), CPU Module, and DIMM 6-27