In The Output From The Prtdiag Command, Warnings May Be Displayed (Cr 6821325) - Fujitsu SPARC Enterprise T5120 Product Notes

In the Output From the prtdiag Command,
Warnings May Be Displayed (CR 6821325)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
In the output from the prtdiag command, warnings may be displayed for input
voltage sensors(V_IN_MAIN) on power supply units.
Voltage sensors:
------------------------------------------------------------
Location
------------------------------------------------------------
SYS/MB/CMP0/MR0
SYS/MB/CMP0/MR0
SYS/MB/CMP1/MR1
SYS/MB/CMP1/MR1
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/MB
SYS/PS0
SYS/PS0
SYS/PS1
SYS/PS1
Workaround: None. Ignore this issue because it is only a display error.
110 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Sensor Status
V_VMEM ok
V_+1V5_VDD ok
V_VMEM ok
V_+1V5_VDD ok
V_+3V3_STBY ok
V_+3V3_MAIN ok
V_+12V0_MAIN ok
V_VDDIO ok
V_VCOREL ok
V_VCORER ok
V_+1V5_IO ok
V_VMEML ok
V_VMEMR ok
V_VBAT ok
V_IN_MAIN warning (-48volts)
V_OUT_MAIN ok
V_IN_MAIN warning (-48volts)
V_OUT_MAIN ok