Syntax Of The Command Line Interface (Cli); Notes Regarding Notations Used In This Manual; Conventions For Alert Messages - Fujitsu PRIMEQUEST 500A Series Installation Manual

Syntax of the Command Line Interface (CLI)

The command syntax is described below.
Command syntax
The command syntax is as follows:
A variable that requires input of a value must be enclosed in < >.
An optional element must be enclosed in [ ].
A group of options for an optional keyword must be enclosed in [ ] and delimited
by |.
A group of options for a mandatory keyword must be enclosed in { } and delimited
by |.
The command syntax is shown in a frame such as this one.

Notes Regarding Notations Used in This Manual

Items marked with "Linux" apply to both Red Hat® Enterprise Linux® AS (v.4 for
Itanium), Red Hat® Enterprise Linux® 5 (for Intel Itanium) SUSE
Enterprise Server 9 for Itanium Processor Family, SUSE
Server 10 for Itanium Processor Family.
The IO Unit is indicated as "IOU" in the MMB Web-UI and in the figures shown in
this manual.

Conventions for Alert Messages

This manual uses the following conventions to show alert messages. An alert message
consists of an alert signal and alert statements.
C122-E001-10EN
This indicates a hazardous situation that could result in serious personal
injury if the user does not perform the procedure correctly.
This indicates a hazardous situation that could result in minor or moderate
personal injury if the user does not perform the procedure correctly. This
signal also indicates that damage to the product or other property may occur
if the user does not perform the procedure correctly.
This indicates information that could help the user to use the product more
effectively.
Preface
Linux
™
Linux Enterprise
™
v