Fujitsu SPARC Enterprise M8000 Service Manual page 6

2.3
2.4
2.5
2.6
2.7
2.8
vi SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
2.2.2 Labels About Handling 2-15
Operator Panel 2-17
2.3.1 Operator Panel Location 2-17
2.3.2 Appearance and Operations 2-18
2.3.3 LED 2-18
2.3.4 Switch 2-20
Determining Which Diagnostics Methods To Use 2-21
Checking the Server and System Configuration 2-23
2.5.1 Checking the Hardware Configuration and FRU Status 2-23
2.5.1.1 Checking the Hardware Configuration 2-24
2.5.2 Checking the Software and XSCF Firmware Configurations 2-24
2.5.2.1 Checking the Software Configuration 2-25
2.5.2.2 Checking the Firmware Configuration 2-26
2.5.3 Downloading the Error Log Information 2-26
Error Conditions 2-26
2.6.1 Predictive Self-Healing Tools 2-27
2.6.2 Monitoring Output 2-28
2.6.3 Messaging Output 2-30
LED Error Display 2-30
2.7.1 When target FRU is indicated by LEDs 2-31
2.7.2 When target FRU is not indicated by LEDs 2-31
Using the Troubleshooting Commands 2-34
2.8.1 Using the showlogs Command 2-34
2.8.2 Using the fmdump Command 2-34
2.8.3 Using the fmadm Command 2-35
2.8.3.1 fmadm config Command 2-35
2.8.3.2 fmadm faulty Command 2-35
2.8.3.3 fmadm repair Command 2-36