Configuring A Fru Into A Domain; Configuring Cmu/Iou - Fujitsu SPARC Enterprise M8000 Service Manual

Diagnostic tests for FAN_A#0 have started.
[This operation may take up to 2 minute(s)]
(progress scale reported in seconds)
--------------------------------------------------
Maintenance/Replacement Menu
Status of the replaced unit.
FRU
-------------
FAN_A#0
--------------------------------------------------
The replacement of FAN_A#0 has completed, normally.[f:finish] :f
--------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.
1.
2.
3.
4.
5.
--------------------------------------------------
Select [1-5|c:cancel] : C
XSCF>
When the tests are complete the program will return to the original menu. Select cancel to
return to the XSCF Shell prompt.
Note – The display may vary depending on the XCP version.
4.2.3

Configuring a FRU into a Domain

4.2.3.1

Configuring CMU/IOU

Perform the following procedure to configure a CMU or IOU when the Oracle Solaris OS is
operating:
4-8 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
0..... 30..... 60.....
Status
--------
Normal
CMU/IOU (CPU Memory Board Unit/IO Unit)
FAN (Fan Unit)
PSU (Power Supply Unit)
XSCFU (Extended System Control Facility Unit)
DDC_A (DDC for BP_A)
90.....done