Port Security Configuration Guidelines
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 46-4
Step 6
Click Insert to create port binding.
You see the Insert Port Security Devices dialog box as shown in
Figure 46-5
Two types of port binding can be created using the Insert Port Security Devices dialog box:
Step 7
Port WWN-pWWN bound to an interface WWN.
•
Switch-Switch WWN bound to an interface. (Mainly useful for ISL binding.)
•
Step 8
Select the type of port binding by clicking the radion buttons and enter the supporting values.
Step 9
Click OK.
Step 10
Click Close to exit the Insert Port Security.... window.
Note
Cisco MDS 9000 Family CLI Configuration Guide
46-8
Edit and Activate Configuration Page
Insert Port Security Devices Dialog Box
To delete an entry in the Edit and Activate Configuration page of the wizard, select the entry and
click the Delete button.
Chapter 46
Configuring Port Security
Figure
46-5.
OL-16184-01, Cisco MDS SAN-OS Release 3.x