Chapter 21
Configuring N Port Virtualization
Configuring NPV
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 21-22
New NPV Port Pairs, Details
Configuring NPV with Fabric Manager
To use Fabric Manager and Device Manager to configure NPV, follow these steps:
Step 1
Launch Device Manager from the core NPV switch to enable NPIV on the core NPV switch. From the
Admin drop-down menu, select Feature Control. Select enable for the NPIV feature (see
Figure
21-4).
Cisco MDS 9000 Family CLI Configuration Guide
21-20
OL-16184-01, Cisco MDS SAN-OS Release 3.x