Configuring Dpvm Config And Pending Databases - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

DPVM
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 28-2

Configuring DPVM Config and Pending Databases

To create and populate the config and pending databases using Fabric Manager, follow these steps:
Step 1 Expand Fabricxx> All VSANs and then select DPVM in the Logical Attributes pane.
You see the DPVM configuration in the Information pane.
Step 2 Click the CFS tab and select a master switch by checking a check box in the Master column.
Step 3 Click the Config Database tab and then click the Create Row to insert a new entry.
You see the Create Config Database dialog box shown in
Figure 28-3
Choose an available WWN and VSAN combination or fill in the pWWN and Login VSAN fields.
Step 4
Click Create to save these changes in the config or pending database or click Close to discard any
Step 5
unsaved changes.
Click the CFS tab and select the Config Action drop-down menu for the master database.
Step 6
You see the options shown in
Cisco MDS 9000 Family CLI Configuration Guide
28-4
DPVM Configuration in Fabric Manager
Create Config Database
Figure 28-4.
Chapter 28 Creating Dynamic VSANs
Figure 28-3.
OL-16184-01, Cisco MDS SAN-OS Release 3.x