S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring NASB
Intelligent Storage Services are features supported on the Storage Services Module (SSM). Intelligent
Storage Services include Network-Accelerated Serverless Backup (NASB).
For licensing details, see
This chapter includes the following sections:
•
•
•
•
Intelligent Storage Services
All Intelligent Storage Services must be enabled on an SSM before the service can be configured.
Services can be enabled for all ports on the SSM, or provisioned in groups of four ports. Switches
running earlier releases that support intelligent storage services enable a service across all ports.
Note
The four port groups are contiguous, requiring you to configure ports 1 through 4, 5 through 8, and so on.
This section contains the following topics:
•
•
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 10, "Obtaining and Installing Licenses."
Intelligent Storage Services, page 58-1
About NASB, page 58-3
Configuring NASB, page 58-5
Default Settings, page 58-6
Enabling Intelligent Storage Services, page 58-2
Disabling Intelligent Storage Services, page 58-3
58
C H A P T E R
Cisco MDS 9000 Family CLI Configuration Guide
58-1