Displaying Fcs Fabric Ports - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 65 Configuring Fabric Configuration Servers
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Step 4 Enter the VSAN ID, or select the ID from the drop-down list of available VSAN IDs.
Enter the Fabric Configuration Server name in the Name field.
Step 5
Choose the type of server (Gateway, Host, Storage).
Step 6
Enter the WWNs for the server.
Step 7
Enter the management addresses for the server.
Step 8
Click Create to create the server, or click Close to discard your changes and return to the Fabric Config
Step 9
Server dialog box.

Displaying FCS Fabric Ports

To display FCS discovery information using Device Manager, follow these steps:
Choose FC > Advanced > Fabric Config Server.
Step 1
You see the Fabric Config Server dialog box.
Click the Fabric Ports tab.
Step 2
You see a list of fabric ports (see
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Figure 65-5).
Cisco MDS 9000 Family CLI Configuration Guide
Displaying FCS Fabric Ports
65-5