Configuring TACACS+ Server Monitoring Parameters
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You can configure this option to test the server periodically, or you can run a one-time only test.
Periodically Validating a TACACS+ Server
To configure the switch to periodically test a TACACS+ server using Fabric Manager, see the
"Configuring TACACS+ Server Monitoring Parameters" section on page
Displaying TACACS+ Server Statistics
To display TACACS+ server statistics using Fabric Manager, follow these steps:
Expand Switches > Security > AAA, and then select TACACS+.
Step 1
You see the TACACS+ configuration in the Information pane.
Step 2
Choose the Statistics tab.
You see the TACACS+ server statistics.
About Users Specifying a TACACS+ Server at Login
By default, an MDS switch forwards an authentication request to the first server in the TACACS+ server
group. You can configure the switch to allow the user to specify which TACACS+ server to send the
authenticate request. If you enable this feature, the user can log in as username@hostname, where the
hostname is the name of a configured TACACS+ server.
Allowing Users to Specify a TACACS+ Server at Login
To configure the switch to allow users to specify a TACACS+ server at login using Fabric Manager,
follow these steps:
Step 1
Expand Switches > Security > AAA, and then select TACACS+.
You see the TACACS+ configuration in the Information pane.
Step 2
Click the Defaults tab.
You see the TACACS+ default settings.
Step 3
Check the DirectedReq check box.
Step 4
Click the Apply Changes icon to save the changes.
Cisco MDS 9000 Family CLI Configuration Guide
41-18
Chapter 41
Configuring RADIUS and TACACS+
41-14.
OL-16184-01, Cisco MDS SAN-OS Release 3.x