Chapter 49
Configuring the SAN Extension Tuner
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 49-4
Select the Ethernet port pairs that correspond to the FCIP link you want to tune and click Next.
Step 2
Note
You see the Specify Parameters dialog box (see
Step 3
Create and activate a new zone to ensure that the virtual N ports are not visible to real initiators in the
SAN by clicking Yes to the zone creation dialog box.
Figure 49-5
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Select Ethernet Port Pair Dialog Box
The Ethernet ports you select should be listed as down.
Specify Parameters Dialog Box
Using the SAN Extension Tuner Wizard
Figure
49-5).
Cisco MDS 9000 Family CLI Configuration Guide
49-5