Log Files - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

System Message Logging Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 63-4
Check the check boxes where you want message logging to occur (ConsoleEnable, TerminalEnable,
Step 2
LineCardEnable).
Choose the message severity threshold from the Console Severity drop-down box for each switch in
Step 3
Fabric Manager (see
Manager (see
Step 4 Click the Apply Changes icon in Fabric Manager, or click Apply in Device Manager to save and apply
your changes.

Log Files

Logging messages can be saved to a log file. You can configure the name of this file and restrict its size
as required. The default log file name is messages. The file name can have up to 80 characters and the
file size ranges from 4096 bytes to 4194304 bytes.
To send log messages to a file using Fabric Manager, follow these steps:
Select a switch in the Fabric pane.
Step 1
Expand Switches, expand Events and select SysLog in the Physical Attributes pane.
Step 2
You see the SysLog information in the Information pane.
Select a switch in the Information pane.
Step 3
Click the Switch Logging tab.
Step 4
You see the information in
Cisco MDS 9000 Family CLI Configuration Guide
63-6
Switch Logging Tab in Device Manager
Figure 63-3) or click the appropriate message severity level radio button in Device
Figure 63-4).
Figure 63-5.
Chapter 63 Configuring System Message Logging
OL-16184-01, Cisco MDS SAN-OS Release 3.x