HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 569

Chapter 29 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Permit QoS traffic with Priority—You set the priority from the drop-down menu.
b.
Click OK to create the IVR zone.
Step 5
To add members to this zone, select the members you want to add from the Fabric pane (see
Step 6
Figure
Figure 29-17
Step 7 Alternatively, click the zone where you want to add members and click the Insert icon.
You see the Add Member to Zone dialog box shown in
Figure 29-18
Step 8 If you added a zone set, select the new zone set and then click Activate.
You see the Save Configuration dialog box shown in
OL-16184-01, Cisco MDS SAN-OS Release 3.x
29-17) and click Add to Zone.
Edit IVR Local Full Zone Database Dialog Box
Add Member to IVR Zone Dialog Box
IVR Zones and IVR Zone Sets
Figure 29-18.
Figure 29-19.
Cisco MDS 9000 Family CLI Configuration Guide
29-25