HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 1295

Cisco mds 9000 family fabric manager configuration guide, release 3.x (ol-8222-10, april 2008)
Hide thumbs Also See for Cisco MDS 9216 - Fabric Switch:
Table of Contents

Advertisement

Chapter 69
Management Software FAQ
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 69-2
Tooltip
loopbackDiagFailure
loopbackIsolation
noCommonVsanIsolation
none
nonParticipating
offline
ohmsExtLBTest
other
parentDown
peerFCIPPortClosedConnection
peerFCIPPortResetConnection
portBindFailure
portBlocked
portChannelMembersDown
portFabricBindFailure
portGracefulShutdown
portVsanMismatchIsolation
rcfInProgres
srcPortNotBound
suspendedByMode
suspendedBySpeed
suspendedByWWN
swFailure
tooManyInvalidFLOGIs
tovMismatch
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Device Manager Tooltip Definitions (continued)
Definition
Loopback diagnostics failure.
Port is connected to another port in the same
switch.
Trunk is isolated because there are no common
vsans with peer.
No failure.
During loop initialization, the port is not allowed
to participate in loop operations
Physical link is in offline state as defined in the
FC-FS standards.
Link suspended due to external loopback
diagnostics failure.
Undefined reason.
The physical port to which this interface is bound
is down.
Port went down because peer FCIP port closed
TCP connection.
Port went down because the TCP connection was
reset by the peer FCIP port.
Port got isolated due to port bind failure.
Port blocked due to FICON.
No operational members.
Port isolated due to fabric bind failure.
Port shutdown gracefully.
An attempt is made to connect two switches using
non-trunking ports having different port VSANs.
An isolated xE_port is transmitting a reconfigure
fabric, requesting a disruptive reconfiguration in
an attempt to build a single, non-isolated fabric.
Only the Interconnect_Ports can become isolated.
No source port is specified for this interface.
Port that belongs to a port channel is suspended
due to incompatible operational mode.
Port that belongs to a port channel is suspended
due to incompatible operational speed.
Port that belongs to a port channel is suspended
due to incompatible remote switch WWN.
Software failure.
Suspended due to too many invalid FLOGIs.
Link isolation due to TOV mismatch
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Other
69-17

Advertisement

Table of Contents
loading

Table of Contents