How Do I Search For Devices In A Fabric - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Other
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Manager or Device Manager instances are closed and then deleting .javaws/cache. In the newer JREs this
directory is created under Documents and Settings\USERNAME and in the older ones it used to be under
Program Files\Java Web Start.
You can also browse beneath the cache folder and delete the offending IPAddress folder (e.g.
cache/http/D10.0.0.1).
Also, check to make sure that the host is not running a virus checker / java blocker?
Also you can run the un-install program, then deleting .cisco_mds directory. Then re-install Fabric
Manager.

How do I search for devices in a fabric?

In Fabric Manager, it is possible to search for one or more devices by different attributes, including
pWWN.
To perform a search in Fabric Manager, follow these steps:
Step 1 Right-click the map and choose Find Elements from the drop-down menu.
You see the Find Fabric dialog box.
Choose End Device from the first drop-down list (see
Step 2
Choose Port WWN from the first drop-down list (see
Step 3
You can also enter only part of the WWN and use a wildcard (*) character (for example, you can enter
*fb*f8).
Figure 69-1
Click Find in Map (see
Step 4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
69-22
Find Fabric Dialog box with End Device and Port WWN selected
Figure 69-1).
Chapter 69 Management Software FAQ
Figure 69-1).
Figure 69-1).
OL-8007-10, Cisco MDS SAN-OS Release 3.x