Configuring Load Balancing; About Load Balancing - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 26 Configuring and Managing VSANs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 26-7
You see a confirmation dialog box.
Step 3 Click Yes to confirm the deletion or No to close the dialog box without deleting the VSAN.

About Load Balancing

Load balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator
exchange OX ID (src-dst-ox-id, the default) for load balancing path selection.

Configuring Load Balancing

To configure load balancing on an existing VSAN using Fabric Manager, follow these steps:
Choose Fabricxx > All VSANs from the Logical Domains pane.
Step 1
You see the VSAN configuration in the Information pane shown in
Figure 26-8
Select a VSAN and complete the LoadBalancing field.
Step 2
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Deleting a VSAN
All VSAN Attributes
Figure 26-8.
Cisco MDS 9000 Family CLI Configuration Guide
VSAN Configuration
26-11