HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 1222

Message Contents
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 64-9 User-Generated Test Message Format
Data Item Description
(Plain text and XML) (Plain text and XML)
Time stamp Date and time stamp of event in ISO time notation:
YYYY-MM-DDTHH:MM:SS.
Note
Message name Name of message. Specifically test message for test type message.
Specific event names listed in the
page
Message type Specifically "Test Call Home".
Message group This field should be ignored by the receiving Call Home processing
application, but may be populated with either "proactive" or "reactive".
Severity level Severity level of message, test Call Home message (see
Source ID Product type for routing.
Device ID Unique device identifier (UDI) for end device generating message. This
field should empty if the message is non-specific to a fabric switch.
Format: type@Sid@serial, where
•
•
•
•
Example: DS-C9509@C@12345678
Customer ID Optional user-configurable field used for contract info or other ID by any
support service.
Contract ID Optional user-configurable field used for contract info or other ID by any
support service.
Site ID Optional user-configurable field used for Cisco-supplied site ID or other
data meaningful to alternate support service.
Server ID If the message is generated from the fabric switch, it is the Unique device
identifier (UDI) of the switch.
Format: type@Sid@serial, where
•
•
•
•
Example: "DS-C9509@C@12345678
Message description Short text describing the error.
Device name Switch that experienced the event.
Cisco MDS 9000 Family CLI Configuration Guide
64-28
The time zone or daylight savings time (DST) offset from UTC
has already been added or subtracted. T is the hardcoded limiter
for the time.
64-20).
type is the product model number from backplane SEEPROM.
@ is a separator character.
Sid is "C" identifying the serial ID as a chassis serial number·
serial is the number identified by the Sid field.
type is the product model number from backplane SEEPROM.
@ is a separator character.
Sid is "C" identifying the serial ID as a chassis serial number·
serial is the number identified by the Sid field.
"Event Triggers" section on
Table
Chapter 64 Configuring Call Home
XML Tag
(XML only)
/mml/header/time
/mml/header/name
/mml/header/type
/mml/header/group
64-5). /mml/header/level
/mml/header/source
/mml/ header /deviceId
/mml/ header /customerId
/mml/ header /contractId
/mml/ header /siteId
/mml/header/serverId
/mml/body/msgDesc
/mml/body/sysName
OL-16184-01, Cisco MDS SAN-OS Release 3.x