HP Cisco MDS 9216 - Fabric Switch Configuration Manual page 745

Chapter 39 Configuring Users and Common Roles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Create Users dialog box shown in
Figure 39-8
Optionally alter the Switches check boxes to specify one or more switches.
Step 3
Enter the user name in the New User field.
Step 4
Select a role from the Role drop-down menu. You can also enter a new role name in the field if you do
Step 5
not want to select one from the drop-down menu. If you do this, go back and configure this role
appropriately (see the
Step 6 Enter the password for the user in the New Password and Confirm Password fields. Enter the same new
password in the New Password and Confirm Password fields.
Step 7 Check the Privacy check box and complete the password fields to encrypt management traffic.
Step 8 Click Create to create the entry or click Close to discard any unsaved changes and close the dialog box.
OL-8007-10, Cisco MDS SAN-OS Release 3.x
Create Users Dialog Box
"User Accounts" section on page
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Figure 39-8.
39-10).
User Accounts
39-13