Fibre Channel Domains
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To restart the fabric disruptively or nondisruptively using Fabric Manager, follow these steps:
Step 1
Expand Fabricxx > VSANxx and then select Domain Manager in the Logical Domains pane for the
fabric and VSAN that you want to restart.
You see the Running tab configuration of the domain in the Information pane.
Figure 25-2
Step 2
Click the Configuration tab.
You see the switch configuration shown in
Figure 25-3
Step 3
Set the Restart drop-down menu to disruptive or nonDisruptive for any switch in the fabric that you
want to restart the fcdomain.
Step 4
Click the Apply Changes icon to issue this fcdomain restart.
About Switch Priority
By default, the configured priority is 128. The valid range to set the priority is between 1 and 254.
Priority 1 has the highest priority. Value 255 is accepted from other switches, but cannot be locally
configured.
Cisco MDS 9000 Family CLI Configuration Guide
25-4
Running Domain Configuration
Figure
Configuring Domains
Chapter 25
Configuring Domain Parameters
25-3.
OL-16184-01, Cisco MDS SAN-OS Release 3.x