Activating A Manually Configured Ivr Topology; Clearing The Configured Ivr Topology - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 29 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Repeat this configuration in all IVR-enabled switches or distribute using CFS.
Note
Tip Transit VSANs are deduced based on your configuration. The IVR feature does not have an explicit
transit-VSAN configuration.

Activating a Manually Configured IVR Topology

After manually configuring the IVR topology , you must activate it.
Active IVR topologies cannot be deactivated. You can only switch to IVR topology automatic mode.
Caution
To activate the manually configured IVR topology using Fabric Manager, follow these steps:
Step 1 Expand All VSANs and then select IVR in the Logical Domains pane.
You see the IVR configuration in the Information pane.
Figure 29-9
Click the Action tab to display the existing IVR topology.
Step 2
Check the Activate Local Topology check box (see
Step 3
Click the Apply Changes icon to activate the IVR topology.
Step 4

Clearing the Configured IVR Topology

You can only clear manually created IVR VSAN topology entries from the configured database.
To clear the IVR topology using Fabric Manager, follow these steps:
Expand All VSANs and then select IVR in the Logical Domains pane.
Step 1
Click the Control tab if it is not already displayed.
Step 2
Highlight the rows you want to delete from the IVR topology.
Step 3
Click the Delete Row icon to delete these rows from the IVR topology.
Step 4
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Action Tab
Figure 29-9).
Cisco MDS 9000 Family CLI Configuration Guide
Manual IVR Configuration
29-17