Committing Changes - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 28 Creating Dynamic VSANs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Committing Changes

If you commit the changes made to the configuration, the configuration in the DPVM pending database
are distributed to other switches. On a successful commit, the configuration change is applied throughout
the fabric and the lock is released.
To commit the DPVM pending database using Fabric Manager, follow these steps:
Expand Fabricxx> All VSANs and then select DPVM from the Logical Attributes pane.
Step 1
You see the DPVM configuration in the Information pane.
Click the CFS tab and select commit from the Config Action drop-down menu.
Step 2
Click Apply Changes to save this change or click Undo Changes to discard the change.
Step 3
OL-16184-01, Cisco MDS SAN-OS Release 3.x
DPVM Database Distribution
Cisco MDS 9000 Family CLI Configuration Guide
28-11