Configuring Ivr Zones And Ivr Zone Sets - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

IVR Zones and IVR Zone Sets
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Configuring IVR Zones and IVR Zone Sets

To create IVR zones and IVR zone sets using Fabric Manager, follow these steps:
Choose Zone > IVR > Edit Local Full Zone Database.
Step 1
You see the Edit IVR Local Full Zone Database dialog box for the selected VSAN (see
Figure 29-15
If you want to view zone membership information, right-click in the Members column, and then click
Show Details for the current row or all rows from the pop-up menu.
Click Zones in the left pane and click the Insert icon to create a zone.
Step 2
You see the Create IVR Zone dialog box shown in
Figure 29-16
Step 3 Enter an IVR zone name.
Step 4 Check one of the following check boxes:
a.
Cisco MDS 9000 Family CLI Configuration Guide
29-24
Edit IVR Local Full Zone Database Dialog Box
Create IVR Zone Dialog Box
Read Only—The zone permits read and denies write.
Chapter 29 Configuring Inter-VSAN Routing
Figure 29-16.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Figure 29-15).