Chapter 44
Configuring IPsec Network Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the IKE configuration in the Information pane (see
Figure 44-13
Select the Initiator Version tab.
Step 2
You see the existing initiator versions for the peers in the Information pane.
Step 3
Click Create Row to create an initiator version.
You see the Create Initiator Version dialog box shown in
Figure 44-14
Step 4
Select the Switches for the remote peer for which this IKE protocol initiator is configured.
Step 5
Enter the IP address of the remote peer.
IKEv1 represents the IKE protocol version used when connecting to a remote peer.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
IKE Configuration
Create Initiator Version Dialog Box
Optional IKE Parameter Configuration
Figure
44-13).
Figure
44-14.
Cisco MDS 9000 Family CLI Configuration Guide
44-19