Distributing The Islb Configuration Using Cfs; Enabling Islb Configuration Distribution - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 50 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Tip The pending changes are only available in the volatile directory and are discarded if the switch is
restarted.

Distributing the iSLB Configuration Using CFS

This section contains the following:
•
•
•
•
•
•
•

Enabling iSLB Configuration Distribution

To enable CFS distribution of the iSLB configuration using Device Manager, follow these steps:
Choose Admin > CFS.
Step 1
You see the CFS dialog box shown in
Figure 50-35
Step 2 Set the Command field to enable for the iSLB feature.
Step 3 Click Apply to save this change.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Enabling iSLB Configuration Distribution, page 50-47
Locking the Fabric, page 50-48
Committing Changes to the Fabric, page 50-48
Discarding Pending Changes, page 50-48
Clearing a Fabric Lock, page 50-48
CFS Merge Process, page 50-49
iSLB CFS Merge Status Conflicts, page 50-49
Enabling CFS in Device Manager
Figure 50-35.
Cisco MDS 9000 Family CLI Configuration Guide
Configuring iSLB
50-47