Configuring The Autopeer Option - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 44 Configuring IPsec Network Security
Crypto IPv4-ACLs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 44-27 iSCSI with End-to-End IPsec Using the auto-peer Option
Subnet X
Host 2
Host 1
iPSEC
MDS A
iPSEC
iPSEC
Router
iPSEC
Host 3

Configuring the AutoPeer Option

To configure the AutoPeer option using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select IPSEC in the Physical Attributes pane.
You see the IPsec configuration in the Information pane (see Figure 44-28).
Cisco MDS 9000 Family CLI Configuration Guide
44-33
OL-16184-01, Cisco MDS SAN-OS Release 3.x