Download
Share
Print this page
HP 2510-48 Specification
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Switch
  5. ProCurve 2510-48
  6. Specification
HP 2510-48 Specification

HP 2510-48 Specification

2510 switch series
Hide thumbs Also See for 2510-48:

Advertisement

Quick Links

Download this manual See also: Manual
QuickSpecs
Overview
Models
HP 2510-48 Switch
HP 2510-24 Switch

Key features

Managed Layer 2 feature set
24 or 48 10/100 ports
Two mini-GBIC slots for fiber connectivity
Quiet fanless design (J9019B)
Industry-leading warranty

Product overview

Designed to provide essential solutions to small and medium businesses, the HP 2510 Switch Series consists of two Layer 2-managed
switches that provide reliable 10/100 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port 10/100 switch
with two dual-personality ports, the 2510 switch series has expanded to include a higher-density HP 2510-48 Switch, with 48 10/100
ports and four Gigabit Ethernet uplinks.

Features and Benefits

Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Connectivity
10/100 and 10/100/1000 connectivity: provides customers with the choice of selecting the network connectivity speed that
best meets their needs, with a consistent user experience
Gigabit uplinks:
2510-24 and 2510-48 switches: the 2510-24 switch has two dual-personality ports for either 10/100/1000 or mini-GBIC
connectivity; the 2510-48 switch has four Gigabit Ethernet ports, which can all be used concurrently with two
10/100/1000 ports and two open mini-GBIC slots
HP Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 copper ports
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple
spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP trunking:
2510-24 switch supports up to two 10/100 trunks each with four links/ports plus one Gigabit Ethernet trunk
HP 2510 Switch Series
DA - 12599 North America — Version 18 — November 5, 2013
HP 2510 Switch Series
J9020A
J9019B
Page 1

Advertisement

loading

Related Manuals for HP 2510-48

Summary of Contents for HP 2510-48

  • Page 1: Key Features

    10/100 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port 10/100 switch with two dual-personality ports, the 2510 switch series has expanded to include a higher-density HP 2510-48 Switch, with 48 10/100 ports and four Gigabit Ethernet uplinks.
  • Page 2 QuickSpecs HP 2510 Switch Series Overview 2510-48 switch supports up to 24 trunks with eight links/ports per trunk Manageability IEEE 802.1AB Link Layer Discovery Protocol (LLDP): provides automated device discovery protocol for easy mapping by network management applications RMON: provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events...
  • Page 3 * Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module, HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP MSM765 zl Mobility Controller.
  • Page 4 \ max=4 SFP Transceivers 1U - Height Configuration Rules: Note 1 The following Transceivers install into this switch: HP X121 1G SFP LC SX Transceiver J4858C HP X121 1G SFP LC LX Transceiver J4859C HP X111 100M SFP LC FX Transceiver...
  • Page 5 HP X122 1G SFP LC BX-U Transceiver J9143A Note 3 If this switch is factory installed in HP Universal Racks, Then the J9583A, J9583A#0D1 or J9583AZ is required. AMS then J9583AZ is required. EMEA then J9583A is required. APD, Japan and China then J9583A#0D1 is required.

  • Page 6: Internal Power Supplies

    Rack Mount Kit HP X410 1U Univ 4-post Rack Mnt Kit J9583A See Configuration Note:1, 2 HP X410 1U Integ Univ 4-post Rck Mnt Kit J9583AZ DA - 12599 North America — Version 18 — November 5, 2013 Page 6...
  • Page 7 Note:1 Cofiguration Rules: Note 1 If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the switch) Note 2 If the J9583A is ordered in EMEA fire the following UNBUILDABLE error: "The J9583A cannot be ordered with option integrated to the Rack in the EMEA region.

  • Page 8: Technical Specifications

    QuickSpecs HP 2510 Switch Series Technical Specifications HP 2510-48 Switch Ports 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full (J9020A) 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);...
  • Page 9 EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Management HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ending with the letter "B" or later, e.g., J4858B, J4859C) are required.
  • Page 10 For details about services and response times in your area, please contact your local HP sales office. HP 2510-24 Switch Ports 24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);...
  • Page 11 EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Management HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ending with the letter "B" or later, e.g., J4858B, J4859C) are required.
  • Page 12 Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. Standards and protocols Device management (applies to all products in...
  • Page 13 QuickSpecs HP 2510 Switch Series Technical Specifications RFC 1493 Bridge MIB RFC 1573 SNMP MIB II RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC 2668 802.3 MAU MIB...
  • Page 14 HP 30 m Multimode OM3 LC/LC Optical Cable AJ838A HP 50 m Multimode OM3 LC/LC Optical Cable AJ839A NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable QK732A NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable QK733A...
  • Page 15 For details about services and response times in your area, please contact your local HP sales office. HP X112 100M SFP LC BX-D Ports 1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full...
  • Page 16 QuickSpecs HP 2510 Switch Series Accessory Product Details product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE- standard 100BASE-BX10-U ("upstream") device.
  • Page 17 For details about services and response times in your area, please contact your local HP sales office. HP X121 1G SFP LC SX Ports 1 LC 1000BASE-SX port; Duplex: full only...
  • Page 18 For details about services and response times in your area, please contact your local HP sales office. HP X121 1G SFP LC LX Ports 1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only...
  • Page 19 The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports. The J8177C is capable of 100 Mb operation. This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.
  • Page 20 Power consumption is 1 watt maximum. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE- standard 1000BASE-BX10-U ("upstream") device.
  • Page 21 Accessory Product Details For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE- standard 1000BASE-BX10-D ("downstream") device.
  • Page 22 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 22...
  • Page 23 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 23...
  • Page 24 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 24...
  • Page 25 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 25...
  • Page 26 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 26...
  • Page 27 For details about services and response times in your area, please contact your local HP sales office. DA - 12599 North America — Version 18 — November 5, 2013 Page 27...
  • Page 28 For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Page 29 For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Page 30 For details about services and response times in your area, please contact your local HP sales office. HP Premier Flex LC/LC Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
  • Page 31 © Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

This manual is also suitable for:

2510-24