Rmon-Based Alerts - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

RMON-Based Alerts

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Create Call Home Profile dialog box.
Select the switches for which you want to send alerts.
Step 5
Enter the name of the profile in the Name field.
Step 6
Choose the message format, message size, and message severity level.
Step 7
Check the syslogGroupPort check box in the AlertGroups section.
Step 8
Click Create to create the profile for the syslog-based alerts.
Step 9
Close the dialog box.
Step 10
RMON-Based Alerts
You can configure the switch to send Call Home notifications corresponding to RMON alert triggers. All
RMON-based Call Home messages have their message level set to NOTIFY (2). The RMON alert group
is defined for all RMON-based Call Home alerts. To receive an RMON-based Call Home alert, you must
associate a destination profile with the RMON alert group.
To configure RMON alert groups using Fabric Manager, follow these steps:
Step 1 Select a switch in the Fabric pane.
Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
You see the Call Home information in the Information pane.
Click the Profiles tab.
Step 3
You see the Call Home profiles shown in
Figure 64-10
Step 4 Select the Create Row icon.
You see the Create Call Home Profile dialog box.
Step 5 Select switches for which to send alerts.
Step 6 Enter the name of the profile.
Step 7 Select the message format, message size, and message severity level.
Step 8 Check the RMON check box in the AlertGroups section.
Step 9 Click Create to create the profile for the RMON-based alerts.
Step 10 Close the dialog box.
Cisco MDS 9000 Family CLI Configuration Guide
64-10
Figure
Call Home Profiles
Chapter 64
64-10.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Configuring Call Home