Configuring Individual Afids; About Ivr Without Ivr Nat Or Auto Topology - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 29 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click the Default Fabric ID tab to display the existing default AFIDs.
Step 2
Click the Create Row icon to create a default AFID.
Step 3
Check the check boxes next to each switch involved in IVR that you want to use this default AFID.
Step 4
Provide a name for each SwitchWWN and set the default Fabric ID.
Step 5
Click Create to create this entry.
Step 6
Repeat
Step 7

Configuring Individual AFIDs

To configure individual AFIDs using Fabric Manager, follow these steps:
Step 1 Expand All VSANs and then select IVR in the Logical Domains pane.
You see the IVR configuration in the Information pane.
Figure 29-5
Click the Fabric ID tab to display the existing AFIDs (see
Step 2
Step 3 Click the Create Row icon to create an AFID.
Step 4 Check the check box next to each switch involved in IVR that you want to use this default AFID.
Step 5 Provide a name for each SwitchWWN and set the Fabric ID.
Step 6 Enter a comma-separated list of VSAN IDs in the VSAN List text box.
Step 7 Click Create to create this entry.
Step 8 Repeat

About IVR Without IVR NAT or Auto Topology

Before configuring an IVR SAN fabric without IVR in NAT mode or IVR topology in auto mode,
consider the following guidelines:
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Step 1 through Step 6 for all default AFIDs that you want to configure in your IVR topology.
Fabric ID Tab
Step 1 through Step 6 for all switches and AFIDs you want to configure in your IVR topology.
Figure 29-5).
Cisco MDS 9000 Family CLI Configuration Guide
Manual IVR Configuration
29-13