Using the Software Install Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Start Install dialog box shown in
Figure 15-6
Note
Optionally, check the Ignore version check results check box to bypass a version check.
Step 8
Note
Caution
Step 9
Click Finish to start the installation.
You see the Download and Install Status dialog box shown in
Cisco MDS 9000 Family CLI Configuration Guide
15-10
Start Install Dialog Box
There is no limit on the number of switches you can upgrade. However, the upgrade is a serial
process; that is, only a single switch is upgraded at a time.
The version check provides information about the impact of the upgrade for each module on the
switch. It also shows any HA-related incompatibilities that might result. You see a final dialog
box at this stage, prompting you to confirm that this check should be performed. We recommend
that you do not ignore the version check results.
If Ignore version check results is checked, the upgrade will proceed even if the current
switch version is newer than the version you are installing.
Figure
15-6.
Figure
15-7.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 15
Software Images